Super Glue & Activators

Also known as cyanoacrylate - this is super glue at its best. Medium thickness and high quality, this Super Glue is ideal for miniatures and small...

20g.General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even ...

Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When use...

Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonde...

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during p...

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one s...

CA-Glue Activator GSW's cyanoacrylate adhesive accelerator, solvent-free alcohol-based, conveniently bottled in a mist spray format for a quick and...

Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonde...

Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When use...

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one s...

Spray. 150 ml.CA-glue activator designed to reduce the bonding time to mere seconds.Especially useful for gluing elements with small contact surface.

UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve t...

Set of three spatulas for applying glues and putties. Made from a material which is resistant to superglue.

These bottle tops fit all 1/2, 1 and 2oz BSI CA Bottles. These bottle tops work best with BSI products.

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one s...

SUPER-GOLD™ and SUPER-GOLD+™ are our odourless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes...

This product is a perfect adhesive for transparent parts. Its resin-based composition allows a slow and residue-free bonding of both, lenses or any...

SUPER-GOLD™ and SUPER-GOLD+™ are our odourless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes...

Insta-Flex+™ clear rubber toughened has similar qualities to our black IC-2000™ but can be used in applications where you do not want the adhesive ...

IC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexi...

Replacement CA Cap top 1pc. This is for one single replacement cap, a random colour will be selected.

Plastic-Cure™ is a gap-filling formulation of CA that works best on plastics. It is packaged in a bottle with a brush built into its top, which in ...

Ciano Cleaner Solvent, cleanser, stain remover of cyanoacrylate glues in a colourless gel. It cleans and removes dried glue residue from a wide var...

FOAM-CURE™ is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal clear and cures to a more flexible consistency tha...

Softens and removes already hardened cyanoacrylate adhesives.Ideal for small touches once the piece has been glued.Contain: 20g.HOW TO USE:Treat th...

Insta-Flex™ flexible thin CA is ideal for many applications, including the installation of CA hinges. When cured, INSTA-FLEX™ does not turn brittle...

These bottle tops fit all 1/2, 1 and 2oz BSI CA Bottles. These bottle tops work best with BSI products.

Roket Hot is a super-thin, fast, penetrating cyanoacrylate adhesive from Deluxe Materials. Cyanoacrylate adhesive (Super Glue) Super-low viscosity...

Hardening Dust for cyanoacrylate glues to increase filling and bond strength. Highly refined powder to a granulometry of 45-90 microns to maximize ...

IC-GEL™ is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time...

This product both softens decals and improves their adhesion to the target surface, also helping to avoid silvering. Cap features an applicator. 10...

A clever temporary wax adhesive with a multitude of uses in modelling or at home, for instance, for placing figures on a model railway layout you l...

This CA Cement Accelerator enables quicker curing of CA cement. Apply the accelerator to one cementing surface and the CA cement to the other. A st...

This quick-hardening cement is perfect for rapidly attaching both plastic and metal parts. The container features a single-push type applicator ...

Fact is that nothing looks like real metal except real metal. And Micro Foil Adhesive is a very easy and very inexpensive way to apply ...