Super Glue & Activators

Super Glue ("Cyanoacrylate") at its best Super glue is an essential component of any miniature hobbyist’s arsenal. The Army Painter’s Super Glue is...

STANDARD DENSITY CYANOACRYLATE GLUE Large format in a 20g pot. The standard cyanoacrylate in the family is suitable for a wide variety of applicati...

Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When use...

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during p...

Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonde...

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one s...

Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonde...

CA-Glue Activator GSW's cyanoacrylate adhesive accelerator, solvent-free alcohol-based, conveniently bottled in a mist spray format for a quick and...

Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When use...

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one s...

Spray. 150 ml.CA-glue activator designed to reduce the bonding time to mere seconds.Especially useful for gluing elements with small contact surface.

UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve t...

Set of three spatulas for applying glues and putties. Made from a material which is resistant to superglue.

These bottle tops fit all 1/2, 1 and 2oz BSI CA Bottles. These bottle tops work best with BSI products.

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one s...

SUPER-GOLD™ and SUPER-GOLD+™ are our odourless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes...

This product is a perfect adhesive for transparent parts. Its resin-based composition allows a slow and residue-free bonding of both, lenses or any...

Replacement CA Cap top 1pc. This is for one single replacement cap, a random colour will be selected.

SUPER-GOLD™ and SUPER-GOLD+™ are our odourless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes...

IC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black coloured CA has added flex...

Insta-Flex+™ clear rubber toughened has similar qualities to our black IC-2000™ but can be used in applications where you do not want the adhesive ...

Plastic-Cure™ is a gap-filling formulation of CA that works best on plastics. It is packaged in a bottle with a brush built into its top, which in ...

FOAM-CURE™ is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal clear and cures to a more flexible consistency tha...

These bottle tops fit all 1/2, 1 and 2oz BSI CA Bottles. These bottle tops work best with BSI products.