Wet Crackle Effects has been formulated for creating wet crackled soil on the lower surfaces of vehicles, diorama’s, and vignettes. This product ha...
View full details
Both the texture and the grain of this reference perfectly imitate asphalt to scale. Listing is for one 100ml pot
Splatter Accumulated Dust with texture, it has been formulated for creating splatter effects and textures on vehicles, dioramas and vignettes. Accu...
View full details
Dark Earth is the perfect product for recreating rich dark shades of earth on diorama or vignette bases where a thick and dense texture is desired....
View full details
The tone of this texture and the appearance mimic wet ground. To reinforce the wet effect we can add some puddles. Listing is for one 100ml pot
High quality Nylon-type Flock with 2mm long fibers (perfect for 25-35mm and larger scales).Artificial or static grass is one of the most commonly u...
View full details
Sold out
A low odor, 2 part component epoxy resin that simulates crystal clear water for miniature, dioramas, vignettes, etc and other hobbies. It includes ...
View full details
Sold out
Set of realistic 3D-printed resin pieces that imitate rocks and rock formations, ideal for adding relief and character to the bases of your miniatu...
View full details
The greenish shade of this texture is indicated for soils with a predominance of green microorganisms on the surface of some humid planets. It can ...
View full details
Texture to represent dry terrains. This colour is very versatile in a multitude of scenarios. Listing is for one 100ml pot
This dark purple texture will make your miniatures stand out on an original surface composed of quartz. Listing is for one 100ml pot
Sold out
Decal Softener softens and flexibilizes decals, allowing them to adapt to curves, corners, and reliefs without wrinkles or bubbles, achieving a ...
View full details
Decal Setter makes it easier and increases adhesion of decals on smooth or slightly textured surfaces, helping them conform perfectly to the det...
View full details
Small, detailed 3D-printed resin mushrooms of different species, ideal for adding a touch of colour and fantasy to the bases of your miniatures, di...
View full details
Limestone texture with a reddish and fiery tone to give the soils a crimson patina. Listing is for one 100ml pot
Special effects for splatters on vehicles, dioramas and vignettes. Its composition allows easy handling with a brush achieving a very realistic tex...
View full details
A must have product for any modeler who wants to add volume to their mud and soil mixtures whether is for a diorama or to be splashed on to their v...
View full details
Specially selected natural gravel, perfect for recreating groundworks in any type of scene or diorama. This product is best suited for use in 1/35 ...
View full details
Sold out
Dry, leafless trees can be ideal for adding a dark and atmospheric touch to the bases of your miniatures, dioramas, or scenery. These 3D-printed re...
View full details
Selected natural gravel suitable for recreating railway ballast. This reference is perfect for use in any 1/72 and H0 scale railway scene. It can a...
View full details
The turquoise tone of this texture is indicated for soils with a predominance of minerals and precious stones with a bluishtone on the surface of t...
View full details
Texture to represent cement and concrete. Listing is for one 100ml pot
This cool blue-lilac texture will make your miniatures stand out on an original surface composed of quartz. Listing is for one 100ml pot
Sold out
Rounded laminated rock fragments to recreate rocky terrain and realistic scenic details. This reference is perfect for use in dioramas and any type...
View full details
This 3D-printed resin fern set is perfect for adding a natural and fresh touch to the bases of your miniatures, dioramas, or scenery. Essential for...
View full details
Laminated rock fragments with sharp angles to recreate rocky terrain and realistic scenic details. This reference is perfect for use in dioramas an...
View full details
These small 3D-printed resin leaves are perfect for decorating bases, dioramas, or any type of scenery, adding a natural and detailed touch to your...
View full details
This cool green texture will make your miniatures stand out on an original surface made up of emeralds and shiny stones. Depending on the position ...
View full details
Texture with an orange/yellowish hue to recreate desert areas with a predominance of limestone rocks. Listing is for one 100ml pot
This two-component product allows room settings with ice. The resin worked in thin layers allows breaking and texturing the pieces of ice. It also ...
View full details
his product is a preservative for reusable natural plants. You just need to put the branch or the small plant in the container with the product ove...
View full details
This reference contains a mix of natural soil, enriched with finely detailed 3D printed bone fragments, and is ideal for recreating realistic grave...
View full details
Natural stone for recreating rocky terrain and realistic scenic details. This reference is perfect for use in desert dioramas and any type of arid...
View full details
Sold out
Detailed 3D-printed miniatures of round cacti, ideal for adding a desert and authentic touch to the bases of your miniatures, dioramas, or gaming t...
View full details
Natural stone for recreating rocky terrain and realistic scenic details. This reference is perfect for use in desert dioramas and any type of arid ...
View full details
This product with brush applicator is a very powerful matting agent, capable of hiding the shiny effects by excess from glue or glitter due to t...
View full details
Ultra-realistic scale leaves for your models, hobby figures, scenes and dioramas.They can be easily fixed in place with small amounts of white glue...
View full details
Sold out
CORRUGATION TOOL Tool designed for waving and corrugating metal sheets, especially recommended for flexible metals, although it can also ...
View full details
This is a two-component colored resin with low odor, intended to simulate standing water in sceneries, dioramas, etc.The resin and hardener come in...
View full details
Two-component product to create realistic anti-slip texture in scale models: 1. Spread the adhesive liquid over the previously delimitated surface ...
View full details
Moss texture for scenography. Its green tone imitates the humid moss of dense and wooded areas, it can be used on trees, terrains, buildings, aband...
View full details
Natural grey stone for recreating rocky terrain and realistic scenic details. This reference is perfect for use in dioramas and any type of terrain...
View full details
Natural volcanic stone in reddish brown tones with selected size to recreate rocky terrains and realistic scenic details. This reference is perfect...
View full details
3D-printed resin grass tufts, ideal for giving a realistic finish and adding a natural touch to the bases of your miniatures, dioramas, or gaming t...
View full details
This is a two-component colored resin with low odor, intended to simulate radioactive and toxic water in scenery, dioramas, etc.Two-component epoxy...
View full details
Moss texture for scenography. Its intense green tone imitates the humid moss of dense and wooded areas, it can be used on trees, terrains, building...
View full details
Natural volcanic stone in reddish brown tones with selected size to recreate rocky terrains and realistic scenic details. This reference is perfect...
View full details
Texture with a pale grayish tone with a predominance of quartz minerals or limerich zones. Listing is for one 100ml pot
