![Airbrush Fabric Hose G1/8H G1/8H](http://eirehobbies.com/cdn/shop/products/airbrush-fabric-hose-g18h-g18h_512x512.jpg?v=1635952992)
Airbrush Fabric Hose G1/8H G1/8H
Green Stuff World
Airbrush Fabric Hose G1/8H G1/8H Connections: 2 x G1/8"Sheathing Material: textileHose diameter (outside): Ø 7mmHose diameter (inside): Ø 4mmOveral...
View full detailsAirbrush Fabric Hose G1/8H G1/8H Connections: 2 x G1/8"Sheathing Material: textileHose diameter (outside): Ø 7mmHose diameter (inside): Ø 4mmOveral...
View full detailsQuickRelease Adaptor 1/8" Quick Release Coupling Adaptor for 1/8" Hose for Airbrush Guns with 1/8" External Thread. Suitable for: all airbrush guns...
View full detailsAirbrush Nozzle 0.2mm Change the broken pieces and get to work your airbrush like new. Designed for GSW airbrushes, but also compatible with most...
View full detailsAirbrush Nozzle 0.2mm Change the broken pieces and get to work your airbrush like new. Designed for GSW airbrushes, but also compatible with most...
View full detailsAirbrush Nozzle 0.3mm Change the broken pieces and get to work your airbrush like new. Designed for GSW airbrushes, but also compatible with most...
View full detailsEasily remove or tighten your airbrush nozzle without fear of damaging it.Fits all Iwata and Neo for Iwata airbrushes EXCEPT Iwata Eclipse Series a...
View full detailsThis 0.3mm needle will fit the Sparmax MAX 3 airbrush.
Used in combination with a Quick Release Body, by adding this Quick Disconnect Plug adapter to your airbrush, this enables you to switch quickly to...
View full detailsThis nylon-covered braided hose is durable and strong. The 1/8 BSP end fits all Iwata airbrushes and the 1/4 BSP end fits compressors or can adapte...
View full detailsRelease your airbrush from the air hose with this Quick Disconnect Set. The Quick Disconnect Body screws onto a air hose and stops the flow of air ...
View full detailsImportant Note: Never remove the nozzle unless it is already damaged. If you thoroughly clean the airbrush, this will prevent the nozzle becoming c...
View full detailsThe Sparmax black and orange 7.5ft (2.3m) braided hose has 48 knits, making it extremely flexible and durable. With a 1/8 BSP fitting on both ends,...
View full detailsThe Quick Release body is a connector that is screwed into the end of your air hose (this fits all 1/8 standard hose fittings) and by simply slidin...
View full detailsA practical solution to controlling your required air pressure, releasing excess air before it reaches the airbrush outlet. Adjust the air pressure...
View full detailsNever remove the nozzle unless it is already damaged. If you thoroughly clean the airbrush, this will prevent the nozzle becoming clogged so that y...
View full detailsThis 0.3mm needle will fit the Sparmax MAX 3 airbrush.
This air hose is made of strong polyurethane. It has 1/8 BSP both ends. The 1/8 BSP fits all Iwata airbrushes and compressors with the 1/8 BSP (Bri...
View full detailsImportant Note: Never remove the nozzle unless it is already damaged. If you thoroughly clean the airbrush, this will prevent the nozzle becoming c...
View full detailsMr. Hobby Mr.Air Hose/Ps. Coil Type 1.5m PS-245 Coil type air hose from Mr. Hobby. 1.5m in length 1/8 connections
Mr. Hobby Mr.Air Hose/Ps. Straight 1.5m PS-244 Vinyl air hose from Mr. Hobby. 1.5m in length 1/8 connections
0.2mm needle for the Sparmax SP-20X airbrush.
Signup to the EireHobbies.com mailing list to be the first to hear about new products and special offers
EireHobbies
2nd Floor, Unit 27
The Brewery Business Park, Dundalk, Louth, A91 N6C0
Tel: 042 9351155
Copyright © 2024 EireHobbies.