Sold out
Mr. Masking Clay
Mr. Hobby
€3.99
Mr. Masking Clay is a clay type masking material from Mr. Hobby. The clay does not require drying time, allowing for immediate paintin...
View full detailsTools & Other
Sold out
Sold out
RespAIR X FFP3 Fold Flat Mask - P3v
RespAIR
€7.49
Protects against very fine particles and liquid aerosols, including very fine dusts, fumes, fibres, mists, radioactive dusts, bacteria and viruses....
View full details
Quick Disconnect Set (with Air Valve) for Hose/Airbrush (1/8 BSP)
Iwata
€17.99
Release your airbrush from the air hose with this Quick Disconnect Set. The Quick Disconnect Body screws onto a air hose and stops the flow of air ...
View full details
Supertouch Nitrile Disposable Gloves - 50 Pairs
Supertouch
€9.99
Nitrile gloves have good strength and offer an alternative to those with latex allergies. Contain no allergenic proteins and are latex free Bead...
View full details
Sparmax 0.3mm Needle For Sparmax MAX
Sparmax
€10.99
This 0.3mm needle will fit the Sparmax MAX 3 airbrush.
Pocket Colour Wheel 9"
The Colour Wheel Company
€11.99
Easy-to-use tool that visually illustrates relationships between colors and demonstrates the results of color mixing.Features grayscale tints and t...
View full details
Iwata Nozzle Wrench
Iwata
€12.99
Easily remove or tighten your airbrush nozzle without fear of damaging it.Fits all Iwata and Neo for Iwata airbrushes EXCEPT Iwata Eclipse Series a...
View full details
3 Metre Iwata Braided Hose 1/8 to 1/4 BSP
Iwata
€20.99
This nylon-covered braided hose is durable and strong. The 1/8 BSP end fits all Iwata airbrushes and the 1/4 BSP end fits compressors or can adapte...
View full details
Sold out
Airbrush Fabric Hose with Moisture Filter
Green Stuff World
€8.49
Airbrush Fabric Hose G1/8H G1/8H This model contains a humidity filter which can be used to release the humidity when airbrushing. Connections: 2 x...
View full details
Panzag Spray Booth Incl. Air Hose 100-240V
Panzag
€169.99
Panzag HS-E420DCK folding spray booth with built in air extraction hose and extractor fan. Features: Air Flow: 4m3/minute. Extremely quiet (47db...
View full details
Sparmax 0.3mm Nozzle For Sparmax MAX
Sparmax
€16.49
Important Note: Never remove the nozzle unless it is already damaged. If you thoroughly clean the airbrush, this will prevent the nozzle becoming c...
View full details
Quick Disconnect Plug for Iwata (1/8 QD male x 1/8 female)
Iwata
€5.49
Used in combination with a Quick Release Body, by adding this Quick Disconnect Plug adapter to your airbrush, this enables you to switch quickly to...
View full details
Sold out
Mr. Mix II GT-28
Mr. Hobby
€9.99
Accessories for mixing paints and modeling chemicals. The set includes: 2 large plastic droppers 2 stainless steel spoons
Quick Disconnect Body for Iwata hose (1/8 QD female x 1/8 male)
Iwata
€13.49
The Quick Release body is a connector that is screwed into the end of your air hose (this fits all 1/8 standard hose fittings) and by simply slidin...
View full details
Sold out
Rotating Plate (Turntable) 25cm diameter
Green Stuff World
€7.49
This 25cm diameter rotating turntable plate is perfect for airbrush users as it allows you to spray on all sides of the artwork without touching...
View full details
FILTER 1 FOR MALEKABINE SB-88
Sparmax
€16.99
Replacement Filter (Main Filter) No. 1 for Sparmax Extraction Unit SB-88
Sparmax 7.5ft braided hose (2.3m) 1/8 BSP
Sparmax
€21.99
The Sparmax black and orange 7.5ft (2.3m) braided hose has 48 knits, making it extremely flexible and durable. With a 1/8 BSP fitting on both ends,...
View full details
Photoetch Bending Tool (1 Screw)
AK Interactive
€23.99
Photoetch bending tool. Made of high quality steel. Separate the piece from the photoetched sheet. Place the piece inside the tool by loosening the...
View full details
Sparmax 0.4mm Needle For Sparmax MAX
Sparmax
€10.99
This 0.3mm needle will fit the Sparmax MAX 3 airbrush.
Sold out
6 foot (2m) Iwata High Strength Vinyl Hose 1/8 to 1/8 BSP
Iwata
€16.99
This air hose is made of strong polyurethane. It has 1/8 BSP both ends. The 1/8 BSP fits all Iwata airbrushes and compressors with the 1/8 BSP (Bri...
View full details
Sparmax SPRAY BOOTH SB-88
Sparmax
€269.99
With a powerful built-in exhaust fan and a three-way adjustable pipe, unwanted fumes first go through 2 different types of filters before vented....
View full details
Sold out
Iwata Lube for Airbrushes - (2ml) Small
Iwata
€4.49
Iwata Lube is essential for good maintenance of your Iwata airbrush or any other airbrush to keep parts moving smoothly. Iwata Lube can be used on ...
View full details
Sold out
Airbrush Needle 0.2mm
Green Stuff World
€3.75
Airbrush Needle 0.2mm Change the broken pieces and get to work your airbrush like new. Designed for GSW airbrushes, but also compatible with most...
View full details