Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one s...
View full details
Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonde...
View full details
Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one s...
View full details
Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When use...
View full details
Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonde...
View full details
INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during p...
View full details
Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When use...
View full details
UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve t...
View full details
Plastic-Cure™ is a gap-filling formulation of CA that works best on plastics. It is packaged in a bottle with a brush built into its top, which in ...
View full details
These bottle tops fit all 1/2, 1 and 2oz BSI CA Bottles. These bottle tops work best with BSI products.
SUPER-GOLD™ and SUPER-GOLD+™ are our odourless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes...
View full details
Replacement CA Cap top 1pc. This is for one single replacement cap, a random colour will be selected.
SUPER-GOLD™ and SUPER-GOLD+™ are our odourless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes...
View full details
Insta-Flex+™ clear rubber toughened has similar qualities to our black IC-2000™ but can be used in applications where you do not want the adhesive ...
View full details
QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to h...
View full details
IC-GEL™ is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time...
View full details
IC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexi...
View full details
Insta-Flex™ flexible thin CA is ideal for many applications, including the installation of CA hinges. When cured, INSTA-FLEX™ does not turn brittle...
View full details
FOAM-CURE™ is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal clear and cures to a more flexible consistency tha...
View full details
MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for Q...
View full details
Sold out
These bottle tops fit all 1/2, 1 and 2oz BSI CA Bottles. These bottle tops work best with BSI products.
SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and mor...
View full details
Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one s...
View full detailsSignup to the EireHobbies.com mailing list to be the first to hear about new products and special offers
EireHobbies
2nd Floor, Unit 27
The Brewery Business Park, Dundalk, Louth, A91 N6C0
Tel: 042 9351155
Copyright © 2024 EireHobbies.